🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

48,000 BTU ACIQ Standard 24 SEER2 Tri Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 18 + 18 + 18

Product image 1
1 / 3

48,000 BTU ACIQ Standard 24 SEER2 Tri Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 18 + 18 + 18

48,000 BTU ACIQ Standard 24 SEER2 Tri Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 18 + 18 + 18

This ACIQ 3-Zone Standard Series System combines high efficiency with advanced climate control. ES-48Z-M6C / ACIQ-18FM-HH-MD-3 is the perfect solution for year-round heating and cooling in up to 3 spaces.

 

48,000 BTU ACIQ Standard Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

Image_21_101f3b4b-d080-447c-87bb-5a1d832a3260

Overview

ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ES-48Z-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

Quick Facts

  • 48,000 BTU, 24.0 SEER2 multi zone heat pump condenser
  • Designed to function with up to 6 attached air handlers
  • Efficient cooling from -13°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

48,000 BTU, 24.0 SEER2

    The 48,000 BTU, ES-48Z-M6 is designed to easily support up to 6 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 24.0 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

    Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

    Self Cleaning Condenser

    ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

     

    18,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

    ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

    The ACIQ-18FM-HH-MB and ACIQ-24FM-HH-MB creatively solve various installation issues.

    Unlevel Surfaces: The pitch of the roof is often reflected indoors as well, providing angled surfaces that make mounting traditional air handlers impossible. This system uses threaded rod to allow the air handler to be level, even when the walls are not. The threaded rod can be adjusted to accommodate all geometry angles, allowing the system to touch the ceiling or hang several feet below it

    Uninsulated Roofs: The cassette and concealed duct air handler systems want at least a foot of space between the ceiling and the roof, this unit can work with a gap as small as one inch, which is what you often see with metal buildings and 3 season rooms. The air handler will be located near the edge of the room, blowing towards the opposite edge of the room, which is different than a cassette system, that blows air in all directions and is located in the center of a room. Sun Rooms: The air handler is actually mounted directly to the wall, fitting perfectly under the windowsill, elevated about 2 inches from the floor, even thou this is referred to as a floor mounted air handler, there is no need to drill or modify the floor as all connections can go thru the wall. Perfect for rooms that are mostly windows, these units pull air from the bottom and blow the air upwards, allowing heating the room in winter and automatically shutting off when the large windows are opened during the summer with the optional door-open sensor.

    Floor Installation: The unit can be mounted to the floor when drilling holes into the wall is highly undesirable, as it common with brick/marble surfaces. The refrigerant/electrical/drain line can be run thru the floor and entirely hidden from view. The system is pre-wired for a 240vac condensate pump with over-flow shutoff connections.

    Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

    Condenser Specifications:

    SKU ES-48Z-M6C
    Refrigerant Charge     148.15 oz
    Weight  254.190000
    AHRI Certificate Number     216032385
    Manufacturer     ACiQ
    Replaces     ES-48Z-M5B
    HSPF2     10.3
    Cooling BTU     47000 BTU
    Heating BTU     48000 BTU
    Maximum CFM 4503
    Decibel Level (dBA)     63
    Electric Heat     Heat Pump
    Energy Star     Yes
    Refrigerant     R454B
    SEER2  24
    Compressor Type     Rotary
    Liquid Line     1/4" (6)
    Suction Line     3/8" (4); 1/2" (2)
    Electrical 208/230V 1 Phase 60 Hz
    Phase Single Phase
    Max Breaker Size     40A
    Min. Breaker Size     45A
    Tonnage 4 Ton
    BTU/Tonnage     48,000 BTU/4 Ton
    Mini Split Type     Wall Mounted
    Zone Compatibility     Multi Zone
    Height     52.48"
    Width     37.48"
    Depth     16.34"
    Warranty 12 year compressor, 7 year parts with online registration
    Resources    
    Safety Information     PROPOSITION 65 WARNING

     

    18,000 BTU Air Handler Specifications:

    SKU ACIQ-18FM-HH-MD
    Weight  70.550000
    Manufacturer     ACiQ
    Controller     Wireless Included
    Cooling BTU     18,000 BTU
    Heating BTU     18,000 BTU
    Maximum CFM     Up to 576.8 CFM
    Decibel Level (dBA)     As low as 29.0 Decibels
    Energy Star     Yes
    Refrigerant     R454B
    Liquid Line     1/4" 
    Suction Line     1/2"
    Electrical 208/230V, 1 Phase, 60Hz
    Electric Phase Filter     Single Phase
    BTU/Tonnage     18,000 BTU/1.5 Ton
    Mini Split Type     Floor Mounted
    Zone Compatibility     Multi Zone, Single Zone
    Height     26.57"
    Width     42.05"
    Depth     9.25"
    Warranty 12 year compressor, 7 year parts with online registration
    Resources    
    Safety Information     PROPOSITION 65 WARNING

    48,000 BTU ACIQ Standard 24 SEER2 Tri Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 18 + 18 + 18

    This ACIQ 3-Zone Standard Series System combines high efficiency with advanced climate control. ES-48Z-M6C / ACIQ-18FM-HH-MD-3 is the perfect solution for year-round heating and cooling in up to 3 spaces.

     

    48,000 BTU ACIQ Standard Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

    Image_21_101f3b4b-d080-447c-87bb-5a1d832a3260

    Overview

    ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ES-48Z-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

    Quick Facts

    • 48,000 BTU, 24.0 SEER2 multi zone heat pump condenser
    • Designed to function with up to 6 attached air handlers
    • Efficient cooling from -13°F to 122°F outdoor temperatures
    • Efficient heating from -13°F to 75°F outdoor temperatures
    • Gold Fin full-protection coating on condenser coil
    • Quiet operation at even the highest workloads

    48,000 BTU, 24.0 SEER2

      The 48,000 BTU, ES-48Z-M6 is designed to easily support up to 6 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 24.0 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

      Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

      Self Cleaning Condenser

      ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

       

      18,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

      ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

      The ACIQ-18FM-HH-MB and ACIQ-24FM-HH-MB creatively solve various installation issues.

      Unlevel Surfaces: The pitch of the roof is often reflected indoors as well, providing angled surfaces that make mounting traditional air handlers impossible. This system uses threaded rod to allow the air handler to be level, even when the walls are not. The threaded rod can be adjusted to accommodate all geometry angles, allowing the system to touch the ceiling or hang several feet below it

      Uninsulated Roofs: The cassette and concealed duct air handler systems want at least a foot of space between the ceiling and the roof, this unit can work with a gap as small as one inch, which is what you often see with metal buildings and 3 season rooms. The air handler will be located near the edge of the room, blowing towards the opposite edge of the room, which is different than a cassette system, that blows air in all directions and is located in the center of a room. Sun Rooms: The air handler is actually mounted directly to the wall, fitting perfectly under the windowsill, elevated about 2 inches from the floor, even thou this is referred to as a floor mounted air handler, there is no need to drill or modify the floor as all connections can go thru the wall. Perfect for rooms that are mostly windows, these units pull air from the bottom and blow the air upwards, allowing heating the room in winter and automatically shutting off when the large windows are opened during the summer with the optional door-open sensor.

      Floor Installation: The unit can be mounted to the floor when drilling holes into the wall is highly undesirable, as it common with brick/marble surfaces. The refrigerant/electrical/drain line can be run thru the floor and entirely hidden from view. The system is pre-wired for a 240vac condensate pump with over-flow shutoff connections.

      Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

      Condenser Specifications:

      SKU ES-48Z-M6C
      Refrigerant Charge     148.15 oz
      Weight  254.190000
      AHRI Certificate Number     216032385
      Manufacturer     ACiQ
      Replaces     ES-48Z-M5B
      HSPF2     10.3
      Cooling BTU     47000 BTU
      Heating BTU     48000 BTU
      Maximum CFM 4503
      Decibel Level (dBA)     63
      Electric Heat     Heat Pump
      Energy Star     Yes
      Refrigerant     R454B
      SEER2  24
      Compressor Type     Rotary
      Liquid Line     1/4" (6)
      Suction Line     3/8" (4); 1/2" (2)
      Electrical 208/230V 1 Phase 60 Hz
      Phase Single Phase
      Max Breaker Size     40A
      Min. Breaker Size     45A
      Tonnage 4 Ton
      BTU/Tonnage     48,000 BTU/4 Ton
      Mini Split Type     Wall Mounted
      Zone Compatibility     Multi Zone
      Height     52.48"
      Width     37.48"
      Depth     16.34"
      Warranty 12 year compressor, 7 year parts with online registration
      Resources    
      Safety Information     PROPOSITION 65 WARNING

       

      18,000 BTU Air Handler Specifications:

      SKU ACIQ-18FM-HH-MD
      Weight  70.550000
      Manufacturer     ACiQ
      Controller     Wireless Included
      Cooling BTU     18,000 BTU
      Heating BTU     18,000 BTU
      Maximum CFM     Up to 576.8 CFM
      Decibel Level (dBA)     As low as 29.0 Decibels
      Energy Star     Yes
      Refrigerant     R454B
      Liquid Line     1/4" 
      Suction Line     1/2"
      Electrical 208/230V, 1 Phase, 60Hz
      Electric Phase Filter     Single Phase
      BTU/Tonnage     18,000 BTU/1.5 Ton
      Mini Split Type     Floor Mounted
      Zone Compatibility     Multi Zone, Single Zone
      Height     26.57"
      Width     42.05"
      Depth     9.25"
      Warranty 12 year compressor, 7 year parts with online registration
      Resources    
      Safety Information     PROPOSITION 65 WARNING

      $1,866.00

      Original: $6,219.99

      -70%
      48,000 BTU ACIQ Standard 24 SEER2 Tri Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 18 + 18 + 18—

      $6,219.99

      $1,866.00

      Description

      48,000 BTU ACIQ Standard 24 SEER2 Tri Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 18 + 18 + 18

      This ACIQ 3-Zone Standard Series System combines high efficiency with advanced climate control. ES-48Z-M6C / ACIQ-18FM-HH-MD-3 is the perfect solution for year-round heating and cooling in up to 3 spaces.

       

      48,000 BTU ACIQ Standard Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

      Image_21_101f3b4b-d080-447c-87bb-5a1d832a3260

      Overview

      ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ES-48Z-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

      Quick Facts

      • 48,000 BTU, 24.0 SEER2 multi zone heat pump condenser
      • Designed to function with up to 6 attached air handlers
      • Efficient cooling from -13°F to 122°F outdoor temperatures
      • Efficient heating from -13°F to 75°F outdoor temperatures
      • Gold Fin full-protection coating on condenser coil
      • Quiet operation at even the highest workloads

      48,000 BTU, 24.0 SEER2

        The 48,000 BTU, ES-48Z-M6 is designed to easily support up to 6 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 24.0 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

        Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

        Self Cleaning Condenser

        ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

         

        18,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

        ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

        The ACIQ-18FM-HH-MB and ACIQ-24FM-HH-MB creatively solve various installation issues.

        Unlevel Surfaces: The pitch of the roof is often reflected indoors as well, providing angled surfaces that make mounting traditional air handlers impossible. This system uses threaded rod to allow the air handler to be level, even when the walls are not. The threaded rod can be adjusted to accommodate all geometry angles, allowing the system to touch the ceiling or hang several feet below it

        Uninsulated Roofs: The cassette and concealed duct air handler systems want at least a foot of space between the ceiling and the roof, this unit can work with a gap as small as one inch, which is what you often see with metal buildings and 3 season rooms. The air handler will be located near the edge of the room, blowing towards the opposite edge of the room, which is different than a cassette system, that blows air in all directions and is located in the center of a room. Sun Rooms: The air handler is actually mounted directly to the wall, fitting perfectly under the windowsill, elevated about 2 inches from the floor, even thou this is referred to as a floor mounted air handler, there is no need to drill or modify the floor as all connections can go thru the wall. Perfect for rooms that are mostly windows, these units pull air from the bottom and blow the air upwards, allowing heating the room in winter and automatically shutting off when the large windows are opened during the summer with the optional door-open sensor.

        Floor Installation: The unit can be mounted to the floor when drilling holes into the wall is highly undesirable, as it common with brick/marble surfaces. The refrigerant/electrical/drain line can be run thru the floor and entirely hidden from view. The system is pre-wired for a 240vac condensate pump with over-flow shutoff connections.

        Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

        Condenser Specifications:

        SKU ES-48Z-M6C
        Refrigerant Charge     148.15 oz
        Weight  254.190000
        AHRI Certificate Number     216032385
        Manufacturer     ACiQ
        Replaces     ES-48Z-M5B
        HSPF2     10.3
        Cooling BTU     47000 BTU
        Heating BTU     48000 BTU
        Maximum CFM 4503
        Decibel Level (dBA)     63
        Electric Heat     Heat Pump
        Energy Star     Yes
        Refrigerant     R454B
        SEER2  24
        Compressor Type     Rotary
        Liquid Line     1/4" (6)
        Suction Line     3/8" (4); 1/2" (2)
        Electrical 208/230V 1 Phase 60 Hz
        Phase Single Phase
        Max Breaker Size     40A
        Min. Breaker Size     45A
        Tonnage 4 Ton
        BTU/Tonnage     48,000 BTU/4 Ton
        Mini Split Type     Wall Mounted
        Zone Compatibility     Multi Zone
        Height     52.48"
        Width     37.48"
        Depth     16.34"
        Warranty 12 year compressor, 7 year parts with online registration
        Resources    
        Safety Information     PROPOSITION 65 WARNING

         

        18,000 BTU Air Handler Specifications:

        SKU ACIQ-18FM-HH-MD
        Weight  70.550000
        Manufacturer     ACiQ
        Controller     Wireless Included
        Cooling BTU     18,000 BTU
        Heating BTU     18,000 BTU
        Maximum CFM     Up to 576.8 CFM
        Decibel Level (dBA)     As low as 29.0 Decibels
        Energy Star     Yes
        Refrigerant     R454B
        Liquid Line     1/4" 
        Suction Line     1/2"
        Electrical 208/230V, 1 Phase, 60Hz
        Electric Phase Filter     Single Phase
        BTU/Tonnage     18,000 BTU/1.5 Ton
        Mini Split Type     Floor Mounted
        Zone Compatibility     Multi Zone, Single Zone
        Height     26.57"
        Width     42.05"
        Depth     9.25"
        Warranty 12 year compressor, 7 year parts with online registration
        Resources    
        Safety Information     PROPOSITION 65 WARNING