Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32
Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32
The Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32, is a cased “A-style” coil designed specifically for use with R-32 refrigerant systems. The Goodman CAPTA1818A3 uses an all-aluminum construction for tubing, fins, and end plates to maximize heat transfer and resist corrosion. The Goodman CAPTA1818A3 supports upflow or downflow installations and comes with an internal, factory-installed thermal expansion valve. Ensuring that you get the maximum efficiency from your outdoor unit, this thermal expansion valve is compatible with both cooling and heat pump applications and is usable for any AHRI certified matched R-32 condenser or heat pump.
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-32 refrigerant including circuits and manifolds
- R-32 sensor designed for the life span of the coil
- CAPTA, CHPTA CAUTA models feature factory installed thermal expansion valves for cooling and heat pump applications
- CSCT models feature a factory-installed thermal expansion valve for cooling applications
- CAPEA, CHPEA and CAHEA models feature:
- Factory-installed electronic expansion valve (EEV) for precise refrigerant control
- Compatibility with Daikin One+ smart thermostat and other Daikin communicating equipment
- Cooling and heat pump applications
- Fault recall of six most recent faults
- CAPFA models feature optimized metering devices (piston)
- Standardized copper suction tube stub length
- Vertical and horizontal models available
- 21" depth for easier attic access
- CAPFA, CAPTA, CHPTA, CAPEA and CHPEA include single front access panel
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Drain pan rails designed to remove and reposition coils with ease without compromising structural integrity
- UV-resistant drain pan
- AHRI certified; ETL listed
Note: Do not use these coils on oil furnaces or any applications where the temperature on the drain pan may exceed 300° F. If these coils are applied with an oil furnace or another application where high temperatures threaten or jeopardize the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan. High-temperature drain pan kits are available as field-installed accessories.
Warranty:
- 10-Year Parts Limited Warranty
- See the warranty document here for full warranty details
Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32 Specifications:
| Brand | Goodman |
| Model | CAPTA1818A3 |
| Warranty |
|
| Refrigerant Type | R-32 |
| Coil Application | Upflow/Downflow |
| Cased | Yes |
| Cabinet Dimensions (W x D x H) | 14" x 21" x 18" |
| Nominal Tons | 1-1/2 |
| Connection |
Liquid: 3/8" Suction: 3/4" |
| Ship Weight | 30 lbs |
| Resources |
Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32
The Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32, is a cased “A-style” coil designed specifically for use with R-32 refrigerant systems. The Goodman CAPTA1818A3 uses an all-aluminum construction for tubing, fins, and end plates to maximize heat transfer and resist corrosion. The Goodman CAPTA1818A3 supports upflow or downflow installations and comes with an internal, factory-installed thermal expansion valve. Ensuring that you get the maximum efficiency from your outdoor unit, this thermal expansion valve is compatible with both cooling and heat pump applications and is usable for any AHRI certified matched R-32 condenser or heat pump.
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-32 refrigerant including circuits and manifolds
- R-32 sensor designed for the life span of the coil
- CAPTA, CHPTA CAUTA models feature factory installed thermal expansion valves for cooling and heat pump applications
- CSCT models feature a factory-installed thermal expansion valve for cooling applications
- CAPEA, CHPEA and CAHEA models feature:
- Factory-installed electronic expansion valve (EEV) for precise refrigerant control
- Compatibility with Daikin One+ smart thermostat and other Daikin communicating equipment
- Cooling and heat pump applications
- Fault recall of six most recent faults
- CAPFA models feature optimized metering devices (piston)
- Standardized copper suction tube stub length
- Vertical and horizontal models available
- 21" depth for easier attic access
- CAPFA, CAPTA, CHPTA, CAPEA and CHPEA include single front access panel
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Drain pan rails designed to remove and reposition coils with ease without compromising structural integrity
- UV-resistant drain pan
- AHRI certified; ETL listed
Note: Do not use these coils on oil furnaces or any applications where the temperature on the drain pan may exceed 300° F. If these coils are applied with an oil furnace or another application where high temperatures threaten or jeopardize the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan. High-temperature drain pan kits are available as field-installed accessories.
Warranty:
- 10-Year Parts Limited Warranty
- See the warranty document here for full warranty details
Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32 Specifications:
| Brand | Goodman |
| Model | CAPTA1818A3 |
| Warranty |
|
| Refrigerant Type | R-32 |
| Coil Application | Upflow/Downflow |
| Cased | Yes |
| Cabinet Dimensions (W x D x H) | 14" x 21" x 18" |
| Nominal Tons | 1-1/2 |
| Connection |
Liquid: 3/8" Suction: 3/4" |
| Ship Weight | 30 lbs |
| Resources |
Original: $712.00
-70%$712.00
$213.60Description
Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32
The Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32, is a cased “A-style” coil designed specifically for use with R-32 refrigerant systems. The Goodman CAPTA1818A3 uses an all-aluminum construction for tubing, fins, and end plates to maximize heat transfer and resist corrosion. The Goodman CAPTA1818A3 supports upflow or downflow installations and comes with an internal, factory-installed thermal expansion valve. Ensuring that you get the maximum efficiency from your outdoor unit, this thermal expansion valve is compatible with both cooling and heat pump applications and is usable for any AHRI certified matched R-32 condenser or heat pump.
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-32 refrigerant including circuits and manifolds
- R-32 sensor designed for the life span of the coil
- CAPTA, CHPTA CAUTA models feature factory installed thermal expansion valves for cooling and heat pump applications
- CSCT models feature a factory-installed thermal expansion valve for cooling applications
- CAPEA, CHPEA and CAHEA models feature:
- Factory-installed electronic expansion valve (EEV) for precise refrigerant control
- Compatibility with Daikin One+ smart thermostat and other Daikin communicating equipment
- Cooling and heat pump applications
- Fault recall of six most recent faults
- CAPFA models feature optimized metering devices (piston)
- Standardized copper suction tube stub length
- Vertical and horizontal models available
- 21" depth for easier attic access
- CAPFA, CAPTA, CHPTA, CAPEA and CHPEA include single front access panel
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Drain pan rails designed to remove and reposition coils with ease without compromising structural integrity
- UV-resistant drain pan
- AHRI certified; ETL listed
Note: Do not use these coils on oil furnaces or any applications where the temperature on the drain pan may exceed 300° F. If these coils are applied with an oil furnace or another application where high temperatures threaten or jeopardize the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan. High-temperature drain pan kits are available as field-installed accessories.
Warranty:
- 10-Year Parts Limited Warranty
- See the warranty document here for full warranty details
Goodman CAPTA1818A3 1.5 Ton AlumaFin7™ Painted, Cased Evaporator Coil with TXV, Upflow/Downflow, 14"Cabinet, R-32 Specifications:
| Brand | Goodman |
| Model | CAPTA1818A3 |
| Warranty |
|
| Refrigerant Type | R-32 |
| Coil Application | Upflow/Downflow |
| Cased | Yes |
| Cabinet Dimensions (W x D x H) | 14" x 21" x 18" |
| Nominal Tons | 1-1/2 |
| Connection |
Liquid: 3/8" Suction: 3/4" |
| Ship Weight | 30 lbs |
| Resources |