🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

55,000 BTU ACIQ Standard 22 SEER2 Quad Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 9 + 12 + 12 + 24

1 / 7
+2

55,000 BTU ACIQ Standard 22 SEER2 Quad Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 9 + 12 + 12 + 24

55,000 BTU ACIQ Standard 22 SEER2 Quad Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 9 + 12 + 12 + 24

This ACIQ 4-Zone Standard Series System combines high efficiency with advanced climate control. ES-55Z-M6C / ACIQ-09FM / ACIQ-12FM-2 / ACIQ-24FM is the perfect solution for year-round heating and cooling in up to 4 spaces.

 

55,000 BTU ACIQ Standard Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

Overview

ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ES-55Z-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

Quick Facts

  • 55,000 BTU, 22.0 SEER2 multi zone heat pump condenser
  • Designed to function with up to 6 attached air handlers
  • Efficient cooling from -13°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

55,000 BTU, 21.3 SEER2

The 55,000 BTU, ES-55Z-M6C is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 68,750 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 22.0 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

Self Cleaning Condenser

ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

 

9,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACiQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom. This is ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room.

Features

  • 12,000 BTU of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a small room in most climates
  • Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

 

12,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom. This is ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room.

Features

  • 12,000 BTU of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a small room in most climates
  • Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

 

24,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

The ACIQ-18FM-HH-MB and ACIQ-24FM-HH-MB creatively solve various installation issues.

Unlevel Surfaces: The pitch of the roof is often reflected indoors as well, providing angled surfaces that make mounting traditional air handlers impossible. This system uses threaded rod to allow the air handler to be level, even when the walls are not. The threaded rod can be adjusted to accommodate all geometry angles, allowing the system to touch the ceiling or hang several feet below it

Uninsulated Roofs: The cassette and concealed duct air handler systems want at least a foot of space between the ceiling and the roof, this unit can work with a gap as small as one inch, which is what you often see with metal buildings and 3 season rooms. The air handler will be located near the edge of the room, blowing towards the opposite edge of the room, which is different than a cassette system, that blows air in all directions and is located in the center of a room. Sun Rooms: The air handler is actually mounted directly to the wall, fitting perfectly under the windowsill, elevated about 2 inches from the floor, even thou this is referred to as a floor mounted air handler, there is no need to drill or modify the floor as all connections can go thru the wall. Perfect for rooms that are mostly windows, these units pull air from the bottom and blow the air upwards, allowing heating the room in winter and automatically shutting off when the large windows are opened during the summer with the optional door-open sensor.

Floor Installation: The unit can be mounted to the floor when drilling holes into the wall is highly undesirable, as it common with brick/marble surfaces. The refrigerant/electrical/drain line can be run thru the floor and entirely hidden from view. The system is pre-wired for a 240vac condensate pump with over-flow shutoff connections.

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

Condenser Specifications:

SKU ES-55Z-M6C
Refrigerant Charge     151.68 oz.
Weight  270.280000
AHRI Certificate Number     216032388
Manufacturer     ACiQ
HSPF2     9.5
Cooling BTU     60000 BTU
Heating BTU     60000 BTU
Maximum CFM 4503
Decibel Level (dBA)     65
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
SEER2  22
Compressor Type     Rotary
Liquid Line     1/4" (6)
Suction Line     3/8" (4); 1/2" (2)
Electrical 208/230V, 1 Phase, 60 Hz
Phase Single Phase
Max Breaker Size     45A
Min. Breaker Size     40A
BTU/Tonnage     55,000 BTU/4.5 Ton
Zone Compatibility Multi Zone
Operating Mode Cooling, Heating
Height     52.48"
Width     37.48"
Depth     16.34"
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

9,000 BTU Air Handler Specifications:

SKU ACIQ-09FM-HH-MD
Weight  41.890000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     9,000 BTU
Heating BTU     9,000 BTU
Maximum CFM     Up to 441.4 CFM
Decibel Level (dBA)     As low as 22.00 Decibels
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     1/4" 
Suction Line     3/8"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     9,000 BTU/0.75 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     24.45
Width     31.26
Depth     7.87
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

12,000 BTU Air Handler Specifications:

SKU ACIQ-12FM-HH-MD
Weight  41.890000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     12,000 BTU
Heating BTU     12,000 BTU
Maximum CFM     Up to 441.4 CFM
Decibel Level (dBA)     As low as 24.00 Decibels
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     1/4" 
Suction Line     1/2"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     12,000 BTU/1 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     24.45
Width     31.26
Depth     7.87
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

24,000 BTU Air Handler Specifications:

SKU ACIQ-24FM-HH-MD
Weight  73.190000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     24,000 BTU
Heating BTU     24,000 BTU
Maximum CFM     Up to 735.8 CFM
Decibel Level (dBA)     As low as 29.0 Decibels
Electric Heat Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     3/8"
Suction Line     5/8"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     24,000 BTU/2 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     26.57"
Width     42.05"
Depth     9.25"
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

55,000 BTU ACIQ Standard 22 SEER2 Quad Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 9 + 12 + 12 + 24

This ACIQ 4-Zone Standard Series System combines high efficiency with advanced climate control. ES-55Z-M6C / ACIQ-09FM / ACIQ-12FM-2 / ACIQ-24FM is the perfect solution for year-round heating and cooling in up to 4 spaces.

 

55,000 BTU ACIQ Standard Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

Overview

ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ES-55Z-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

Quick Facts

  • 55,000 BTU, 22.0 SEER2 multi zone heat pump condenser
  • Designed to function with up to 6 attached air handlers
  • Efficient cooling from -13°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

55,000 BTU, 21.3 SEER2

The 55,000 BTU, ES-55Z-M6C is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 68,750 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 22.0 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

Self Cleaning Condenser

ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

 

9,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACiQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom. This is ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room.

Features

  • 12,000 BTU of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a small room in most climates
  • Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

 

12,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom. This is ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room.

Features

  • 12,000 BTU of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a small room in most climates
  • Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

 

24,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

The ACIQ-18FM-HH-MB and ACIQ-24FM-HH-MB creatively solve various installation issues.

Unlevel Surfaces: The pitch of the roof is often reflected indoors as well, providing angled surfaces that make mounting traditional air handlers impossible. This system uses threaded rod to allow the air handler to be level, even when the walls are not. The threaded rod can be adjusted to accommodate all geometry angles, allowing the system to touch the ceiling or hang several feet below it

Uninsulated Roofs: The cassette and concealed duct air handler systems want at least a foot of space between the ceiling and the roof, this unit can work with a gap as small as one inch, which is what you often see with metal buildings and 3 season rooms. The air handler will be located near the edge of the room, blowing towards the opposite edge of the room, which is different than a cassette system, that blows air in all directions and is located in the center of a room. Sun Rooms: The air handler is actually mounted directly to the wall, fitting perfectly under the windowsill, elevated about 2 inches from the floor, even thou this is referred to as a floor mounted air handler, there is no need to drill or modify the floor as all connections can go thru the wall. Perfect for rooms that are mostly windows, these units pull air from the bottom and blow the air upwards, allowing heating the room in winter and automatically shutting off when the large windows are opened during the summer with the optional door-open sensor.

Floor Installation: The unit can be mounted to the floor when drilling holes into the wall is highly undesirable, as it common with brick/marble surfaces. The refrigerant/electrical/drain line can be run thru the floor and entirely hidden from view. The system is pre-wired for a 240vac condensate pump with over-flow shutoff connections.

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

Condenser Specifications:

SKU ES-55Z-M6C
Refrigerant Charge     151.68 oz.
Weight  270.280000
AHRI Certificate Number     216032388
Manufacturer     ACiQ
HSPF2     9.5
Cooling BTU     60000 BTU
Heating BTU     60000 BTU
Maximum CFM 4503
Decibel Level (dBA)     65
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
SEER2  22
Compressor Type     Rotary
Liquid Line     1/4" (6)
Suction Line     3/8" (4); 1/2" (2)
Electrical 208/230V, 1 Phase, 60 Hz
Phase Single Phase
Max Breaker Size     45A
Min. Breaker Size     40A
BTU/Tonnage     55,000 BTU/4.5 Ton
Zone Compatibility Multi Zone
Operating Mode Cooling, Heating
Height     52.48"
Width     37.48"
Depth     16.34"
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

9,000 BTU Air Handler Specifications:

SKU ACIQ-09FM-HH-MD
Weight  41.890000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     9,000 BTU
Heating BTU     9,000 BTU
Maximum CFM     Up to 441.4 CFM
Decibel Level (dBA)     As low as 22.00 Decibels
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     1/4" 
Suction Line     3/8"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     9,000 BTU/0.75 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     24.45
Width     31.26
Depth     7.87
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

12,000 BTU Air Handler Specifications:

SKU ACIQ-12FM-HH-MD
Weight  41.890000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     12,000 BTU
Heating BTU     12,000 BTU
Maximum CFM     Up to 441.4 CFM
Decibel Level (dBA)     As low as 24.00 Decibels
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     1/4" 
Suction Line     1/2"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     12,000 BTU/1 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     24.45
Width     31.26
Depth     7.87
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

24,000 BTU Air Handler Specifications:

SKU ACIQ-24FM-HH-MD
Weight  73.190000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     24,000 BTU
Heating BTU     24,000 BTU
Maximum CFM     Up to 735.8 CFM
Decibel Level (dBA)     As low as 29.0 Decibels
Electric Heat Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     3/8"
Suction Line     5/8"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     24,000 BTU/2 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     26.57"
Width     42.05"
Depth     9.25"
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING
$8,349.99
55,000 BTU ACIQ Standard 22 SEER2 Quad Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 9 + 12 + 12 + 24—
$8,349.99

Description

55,000 BTU ACIQ Standard 22 SEER2 Quad Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 9 + 12 + 12 + 24

This ACIQ 4-Zone Standard Series System combines high efficiency with advanced climate control. ES-55Z-M6C / ACIQ-09FM / ACIQ-12FM-2 / ACIQ-24FM is the perfect solution for year-round heating and cooling in up to 4 spaces.

 

55,000 BTU ACIQ Standard Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

Overview

ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ES-55Z-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

Quick Facts

  • 55,000 BTU, 22.0 SEER2 multi zone heat pump condenser
  • Designed to function with up to 6 attached air handlers
  • Efficient cooling from -13°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

55,000 BTU, 21.3 SEER2

The 55,000 BTU, ES-55Z-M6C is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 68,750 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 22.0 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

Self Cleaning Condenser

ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

 

9,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACiQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom. This is ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room.

Features

  • 12,000 BTU of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a small room in most climates
  • Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

 

12,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom. This is ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room.

Features

  • 12,000 BTU of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a small room in most climates
  • Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

 

24,000 BTU ACIQ Platinum Single Zone Floor Mount Mini Split Air Handler - R454B | 230V

ACIQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a heat console type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

The ACIQ-18FM-HH-MB and ACIQ-24FM-HH-MB creatively solve various installation issues.

Unlevel Surfaces: The pitch of the roof is often reflected indoors as well, providing angled surfaces that make mounting traditional air handlers impossible. This system uses threaded rod to allow the air handler to be level, even when the walls are not. The threaded rod can be adjusted to accommodate all geometry angles, allowing the system to touch the ceiling or hang several feet below it

Uninsulated Roofs: The cassette and concealed duct air handler systems want at least a foot of space between the ceiling and the roof, this unit can work with a gap as small as one inch, which is what you often see with metal buildings and 3 season rooms. The air handler will be located near the edge of the room, blowing towards the opposite edge of the room, which is different than a cassette system, that blows air in all directions and is located in the center of a room. Sun Rooms: The air handler is actually mounted directly to the wall, fitting perfectly under the windowsill, elevated about 2 inches from the floor, even thou this is referred to as a floor mounted air handler, there is no need to drill or modify the floor as all connections can go thru the wall. Perfect for rooms that are mostly windows, these units pull air from the bottom and blow the air upwards, allowing heating the room in winter and automatically shutting off when the large windows are opened during the summer with the optional door-open sensor.

Floor Installation: The unit can be mounted to the floor when drilling holes into the wall is highly undesirable, as it common with brick/marble surfaces. The refrigerant/electrical/drain line can be run thru the floor and entirely hidden from view. The system is pre-wired for a 240vac condensate pump with over-flow shutoff connections.

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.

Condenser Specifications:

SKU ES-55Z-M6C
Refrigerant Charge     151.68 oz.
Weight  270.280000
AHRI Certificate Number     216032388
Manufacturer     ACiQ
HSPF2     9.5
Cooling BTU     60000 BTU
Heating BTU     60000 BTU
Maximum CFM 4503
Decibel Level (dBA)     65
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
SEER2  22
Compressor Type     Rotary
Liquid Line     1/4" (6)
Suction Line     3/8" (4); 1/2" (2)
Electrical 208/230V, 1 Phase, 60 Hz
Phase Single Phase
Max Breaker Size     45A
Min. Breaker Size     40A
BTU/Tonnage     55,000 BTU/4.5 Ton
Zone Compatibility Multi Zone
Operating Mode Cooling, Heating
Height     52.48"
Width     37.48"
Depth     16.34"
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

9,000 BTU Air Handler Specifications:

SKU ACIQ-09FM-HH-MD
Weight  41.890000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     9,000 BTU
Heating BTU     9,000 BTU
Maximum CFM     Up to 441.4 CFM
Decibel Level (dBA)     As low as 22.00 Decibels
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     1/4" 
Suction Line     3/8"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     9,000 BTU/0.75 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     24.45
Width     31.26
Depth     7.87
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

12,000 BTU Air Handler Specifications:

SKU ACIQ-12FM-HH-MD
Weight  41.890000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     12,000 BTU
Heating BTU     12,000 BTU
Maximum CFM     Up to 441.4 CFM
Decibel Level (dBA)     As low as 24.00 Decibels
Electric Heat     Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     1/4" 
Suction Line     1/2"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     12,000 BTU/1 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     24.45
Width     31.26
Depth     7.87
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

 

24,000 BTU Air Handler Specifications:

SKU ACIQ-24FM-HH-MD
Weight  73.190000
Manufacturer     ACiQ
Controller     Wireless Included
Cooling BTU     24,000 BTU
Heating BTU     24,000 BTU
Maximum CFM     Up to 735.8 CFM
Decibel Level (dBA)     As low as 29.0 Decibels
Electric Heat Heat Pump
Energy Star     Yes
Refrigerant     R454B
Liquid Line     3/8"
Suction Line     5/8"
Electrical 208/230V, 1 Phase, 60Hz
Electric Phase Filter     Single Phase
BTU/Tonnage     24,000 BTU/2 Ton
Mini Split Type     Floor Mounted
Zone Compatibility     Multi Zone, Single Zone
Height     26.57"
Width     42.05"
Depth     9.25"
Warranty 12 year compressor, 7 year parts with online registration
Resources    
Safety Information     PROPOSITION 65 WARNING

You may also like

-70%
Thumbnail 1

ACiQ PTAC Standard Aluminum Grille - White Enamel Finish

$65.00

$19.50

-70%
Thumbnail 1

ACiQ PTAC Extruded Architectural Grille

$165.00

$49.50

Thumbnail 1Thumbnail 2

ACiQ 7,000 BTU PTAC Heat Pump Air Conditioner Unit with 2.5kW Electric Heater

$1,010.00

-70%
Thumbnail 1Thumbnail 2

ACiQ Standard 42 in. PTAC Universal Terminal Wall Sleeve

$150.00

$45.00

Thumbnail 1

Refrigerant Line Set with 3/8" and 5/8" Line Ends - 15 feet

$221.38

Thumbnail 1Thumbnail 2

Mini Condensate Pump Removal Water 10.5 GPH for Mini Split Air Handlers

$141.68

Thumbnail 1Thumbnail 2

Free ACiQ Wired Programmable Thermostat ($119.99 Value)

$119.99

Thumbnail 1

ACiQ 15 Kilowatt 51,150 BTU Heater Coil

$259.00

Thumbnail 1

ACiQ 20 Kilowatt 68,200 BTU Heater Coil

$289.00

Thumbnail 1

ACiQ 5 Kilowatt 16,200 BTU Heater Coil

$150.00

-70%
Thumbnail 1

ACiQ 10 Kilowatt 34,100 BTU Heater Coil

$212.00

$63.60

-70%
Thumbnail 1

Refrigerant Line Set with 3/8" and 5/8" Line Ends - 30 feet

$263.12

$78.94