🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

55,000 BTU ACIQ Extreme 20 SEER2 Quad Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 18 + 24

1 / 14
+9

55,000 BTU ACIQ Extreme 20 SEER2 Quad Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 18 + 24

55,000 BTU ACIQ Extreme 20 SEER2 Quad Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 18 + 24

This ACiQ 4-Zone Extreme Series System offers maximum efficiency and is built for the most extreme hot or cold climates. ACiQ-55Z-HH-M6C / ACIQ-12CD-2 / ACIQ-18CD / ACIQ-24CD is the perfect solution for year-round heating and cooling in up to 4 spaces.

 

55,000 BTU ACIQ Extreme Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

Overview

ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACIQ-55z-HH-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

Quick Facts

  • 55,000 BTU, 22.2 SEER2 multi zone heat pump condenser
  • Designed to function with up to 6 attached air handlers
  • Efficient cooling from -22°F to 122°F outdoor temperatures
  • Efficient heating from -22°F to 75°F outdoor temperatures
  • Integrated Extreme Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

55,000 BTU, 22.2 SEER2

The 55,000 BTU, ACIQ-55z-HH-M6C is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 22.2 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

Extreme Heat Base Pan Heater Technology

1202791852265065

Each ACiQ condenser has integrated Extreme Heat technology to maximize heat performance in extreme cold weather. Extended heat pump performance (HyperHeat) harnesses the power of inverter condenser with outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22°F. Plus, every Extreme Heat ACiQ condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation.

Quality Construction

aciq-quality-construction_2

State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.

Highest Efficiency

compressor_1_2

ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.

Longer life, longer warranty

aciq-longer-warranty_2

Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. Register equipment at ACiQ.com to extend warranty protection to 7 years parts, 12 years compressor.

Installation and Maintenance

1202791852265067

ACiQ multi zone condensers are pre-charged with R410-A refrigerant for 25' per air handler connection. In many cases, no additional refrigerant is needed. All units are run-tested at the factory for years of trouble-free performance. Troubleshooting is easy thanks to unit's self diagnosing control board with alerts that are sent to each connected air handler.

Self Cleaning Condenser

ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

 

12,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

Installation Considerations

Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

Features

  • 12,000 btu of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a smaller room in most climates
  • Wall mounted thermostat included

Concealed Duct

40mbq_1_4_1

Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

Quiet Comfort

Concealed-duct_1

Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

 

18,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

Installation Considerations

Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

Features

  • 18,000 btu of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a medium room in most climates
  • Wall mounted thermostat included

Concealed Duct

40mbq_1_4_1

Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

Quiet Comfort

Concealed-duct_1

Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

 

24,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

Installation Considerations

Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

Features

  • 24,000 btu of Heating or Cooling
  • Dry and Fan modes also available
  • Good for a medium room in most climates
  • Wall mounted thermostat included

Concealed Duct

    40mbq_1_4_1

    Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

    Quiet Comfort

    Concealed-duct_1

    Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

    Condenser Specifications:

    SKU ACIQ-55Z-HH-M6C
    Refrigerant Charge     151.68 oz.
    Weight 276.680000
    AHRI Certificate Number 216032373
    Brand/Manufacturer ACiQ
    Replaces     ACIQ-55Z-HH-M5B
    Product Features Low Ambient Heating
    HSPF2 10.5
    Cooling BTU 51000
    Heating BTU 55000
    Maximum CFM 4503
    Decibel Level (dBA) 65
    Electric Heat Heat Pump
    Energy Star Yes
    Refrigerant R454B
    SEER2  22.2
    Compressor Type     Twin Rotary
    Liquid Line     1/4" (6)
    Suction Line     3/8" (4); 1/2" (2)
    Electrical     208/230V, 1 Phase, 60 Hz
    Phase Single Phase
    Max Breaker Size     40A
    Min. Breaker Size     39.5A
    Tonnage 4.5 Ton
    BTU/Tonnage     55,000 BTU/4.5 Ton
    Mini Split Type     Wall Mounted
    Zone Compatibility     Multi Zone
    Height 52.48"
    Width 37.48"
    Depth 16.34"
    Warranty 12 year compressor, 7 year parts with online registration
    Resources
    Safety Information PROPOSITION 65 WARNING

     

    12,000 BTU Air Handler Specifications:

    SKU ACIQ-12CD-HH-MC
    Weight  73.850000
    Manufacturer     ACiQ
    Cooling BTU 12,000 BTU
    Heating BTU 12,000 BTU
    Maximum CFM Up to 419.10 CFM
    Decibel Level (dBA) As low as 26.0 Decibels
    Electric Heat     Heat Pump
    Refrigerant R454B
    Liquid Line 1/4"
    Suction Line 3/8"
    Electrical 208/230V, 1 Phase, 60Hz
    Electric Phase Filter     Single Phase
    BTU/Tonnage 12,000 BTU/1 Ton
    Mini Split Type Concealed Duct
    Zone Compatibility Multi Zone, Single Zone
    Height     9.65"
    Width 27.56"
    Depth 29.53"
    Warranty 12 year compressor, 7 year parts with online registration
    Resources
    Safety Information PROPOSITION 65 WARNING

     

    18,000 BTU Air Handler Specifications:

    SKU ACIQ-18CD-HH-MC
    Weight  91.270000
    Manufacturer     ACiQ
    Cooling BTU 18,000 BTU
    Heating BTU 18,000 BTU
    Maximum CFM Up to 706.30 CFM
    Decibel Level (dBA) As low as 28.0 Decibels
    Electric Heat     Heat Pump
    Refrigerant R454B
    Liquid Line 1/4"
    Suction Line 1/2"
    Electrical 208/230V, 1 Phase, 60Hz
    Electric Phase Filter     Single Phase
    BTU/Tonnage 18,000 BTU/1.5 Ton
    Mini Split Type Concealed Duct
    Zone Compatibility Multi Zone, Single Zone
    Height     9.65"
    Width 39.37"
    Depth 29.53"
    Warranty 12 year compressor, 7 year parts with online registration
    Resources
    Safety Information PROPOSITION 65 WARNING

     

    24,000 BTU Air Handler Specifications:

    SKU ACIQ-24CD-HH-MC
    Weight  91.930000
    Manufacturer     ACiQ
    Cooling BTU 24,000 BTU
    Heating BTU 24,000 BTU
    Maximum CFM Up to 853.50 CFM
    Decibel Level (dBA) As Low as 29.50 Decibels
    Electric Heat     Heat Pump
    Refrigerant R454B
    Liquid Line 3/8"
    Suction Line 5/8"
    Electrical 208/230V, 1 Phase, 60Hz
    Electric Phase Filter     Single Phase
    BTU/Tonnage 24,000 BTU/2 Ton
    Mini Split Type Concealed Duct
    Zone Compatibility Multi Zone, Single Zone
    Height     9.65"
    Width 39.37"
    Depth 29.53"
    Warranty 12 year compressor, 7 year parts with online registration
    Resources
    Safety Information PROPOSITION 65 WARNING

    55,000 BTU ACIQ Extreme 20 SEER2 Quad Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 18 + 24

    This ACiQ 4-Zone Extreme Series System offers maximum efficiency and is built for the most extreme hot or cold climates. ACiQ-55Z-HH-M6C / ACIQ-12CD-2 / ACIQ-18CD / ACIQ-24CD is the perfect solution for year-round heating and cooling in up to 4 spaces.

     

    55,000 BTU ACIQ Extreme Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

    Overview

    ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACIQ-55z-HH-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

    Quick Facts

    • 55,000 BTU, 22.2 SEER2 multi zone heat pump condenser
    • Designed to function with up to 6 attached air handlers
    • Efficient cooling from -22°F to 122°F outdoor temperatures
    • Efficient heating from -22°F to 75°F outdoor temperatures
    • Integrated Extreme Heat technology with base pan heater
    • Gold Fin full-protection coating on condenser coil
    • Quiet operation at even the highest workloads

    55,000 BTU, 22.2 SEER2

    The 55,000 BTU, ACIQ-55z-HH-M6C is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 22.2 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

    Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

    Extreme Heat Base Pan Heater Technology

    1202791852265065

    Each ACiQ condenser has integrated Extreme Heat technology to maximize heat performance in extreme cold weather. Extended heat pump performance (HyperHeat) harnesses the power of inverter condenser with outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22°F. Plus, every Extreme Heat ACiQ condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation.

    Quality Construction

    aciq-quality-construction_2

    State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.

    Highest Efficiency

    compressor_1_2

    ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.

    Longer life, longer warranty

    aciq-longer-warranty_2

    Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. Register equipment at ACiQ.com to extend warranty protection to 7 years parts, 12 years compressor.

    Installation and Maintenance

    1202791852265067

    ACiQ multi zone condensers are pre-charged with R410-A refrigerant for 25' per air handler connection. In many cases, no additional refrigerant is needed. All units are run-tested at the factory for years of trouble-free performance. Troubleshooting is easy thanks to unit's self diagnosing control board with alerts that are sent to each connected air handler.

    Self Cleaning Condenser

    ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

     

    12,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

    Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

    The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

    Installation Considerations

    Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

    Features

    • 12,000 btu of Heating or Cooling
    • Dry and Fan modes also available
    • Good for a smaller room in most climates
    • Wall mounted thermostat included

    Concealed Duct

    40mbq_1_4_1

    Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

    Quiet Comfort

    Concealed-duct_1

    Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

     

    18,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

    Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

    The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

    Installation Considerations

    Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

    Features

    • 18,000 btu of Heating or Cooling
    • Dry and Fan modes also available
    • Good for a medium room in most climates
    • Wall mounted thermostat included

    Concealed Duct

    40mbq_1_4_1

    Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

    Quiet Comfort

    Concealed-duct_1

    Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

     

    24,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

    Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

    The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

    Installation Considerations

    Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

    Features

    • 24,000 btu of Heating or Cooling
    • Dry and Fan modes also available
    • Good for a medium room in most climates
    • Wall mounted thermostat included

    Concealed Duct

      40mbq_1_4_1

      Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

      Quiet Comfort

      Concealed-duct_1

      Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

      Condenser Specifications:

      SKU ACIQ-55Z-HH-M6C
      Refrigerant Charge     151.68 oz.
      Weight 276.680000
      AHRI Certificate Number 216032373
      Brand/Manufacturer ACiQ
      Replaces     ACIQ-55Z-HH-M5B
      Product Features Low Ambient Heating
      HSPF2 10.5
      Cooling BTU 51000
      Heating BTU 55000
      Maximum CFM 4503
      Decibel Level (dBA) 65
      Electric Heat Heat Pump
      Energy Star Yes
      Refrigerant R454B
      SEER2  22.2
      Compressor Type     Twin Rotary
      Liquid Line     1/4" (6)
      Suction Line     3/8" (4); 1/2" (2)
      Electrical     208/230V, 1 Phase, 60 Hz
      Phase Single Phase
      Max Breaker Size     40A
      Min. Breaker Size     39.5A
      Tonnage 4.5 Ton
      BTU/Tonnage     55,000 BTU/4.5 Ton
      Mini Split Type     Wall Mounted
      Zone Compatibility     Multi Zone
      Height 52.48"
      Width 37.48"
      Depth 16.34"
      Warranty 12 year compressor, 7 year parts with online registration
      Resources
      Safety Information PROPOSITION 65 WARNING

       

      12,000 BTU Air Handler Specifications:

      SKU ACIQ-12CD-HH-MC
      Weight  73.850000
      Manufacturer     ACiQ
      Cooling BTU 12,000 BTU
      Heating BTU 12,000 BTU
      Maximum CFM Up to 419.10 CFM
      Decibel Level (dBA) As low as 26.0 Decibels
      Electric Heat     Heat Pump
      Refrigerant R454B
      Liquid Line 1/4"
      Suction Line 3/8"
      Electrical 208/230V, 1 Phase, 60Hz
      Electric Phase Filter     Single Phase
      BTU/Tonnage 12,000 BTU/1 Ton
      Mini Split Type Concealed Duct
      Zone Compatibility Multi Zone, Single Zone
      Height     9.65"
      Width 27.56"
      Depth 29.53"
      Warranty 12 year compressor, 7 year parts with online registration
      Resources
      Safety Information PROPOSITION 65 WARNING

       

      18,000 BTU Air Handler Specifications:

      SKU ACIQ-18CD-HH-MC
      Weight  91.270000
      Manufacturer     ACiQ
      Cooling BTU 18,000 BTU
      Heating BTU 18,000 BTU
      Maximum CFM Up to 706.30 CFM
      Decibel Level (dBA) As low as 28.0 Decibels
      Electric Heat     Heat Pump
      Refrigerant R454B
      Liquid Line 1/4"
      Suction Line 1/2"
      Electrical 208/230V, 1 Phase, 60Hz
      Electric Phase Filter     Single Phase
      BTU/Tonnage 18,000 BTU/1.5 Ton
      Mini Split Type Concealed Duct
      Zone Compatibility Multi Zone, Single Zone
      Height     9.65"
      Width 39.37"
      Depth 29.53"
      Warranty 12 year compressor, 7 year parts with online registration
      Resources
      Safety Information PROPOSITION 65 WARNING

       

      24,000 BTU Air Handler Specifications:

      SKU ACIQ-24CD-HH-MC
      Weight  91.930000
      Manufacturer     ACiQ
      Cooling BTU 24,000 BTU
      Heating BTU 24,000 BTU
      Maximum CFM Up to 853.50 CFM
      Decibel Level (dBA) As Low as 29.50 Decibels
      Electric Heat     Heat Pump
      Refrigerant R454B
      Liquid Line 3/8"
      Suction Line 5/8"
      Electrical 208/230V, 1 Phase, 60Hz
      Electric Phase Filter     Single Phase
      BTU/Tonnage 24,000 BTU/2 Ton
      Mini Split Type Concealed Duct
      Zone Compatibility Multi Zone, Single Zone
      Height     9.65"
      Width 39.37"
      Depth 29.53"
      Warranty 12 year compressor, 7 year parts with online registration
      Resources
      Safety Information PROPOSITION 65 WARNING
      $2,850.00

      Original: $9,499.99

      -70%
      55,000 BTU ACIQ Extreme 20 SEER2 Quad Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 18 + 24—

      $9,499.99

      $2,850.00

      Description

      55,000 BTU ACIQ Extreme 20 SEER2 Quad Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 18 + 24

      This ACiQ 4-Zone Extreme Series System offers maximum efficiency and is built for the most extreme hot or cold climates. ACiQ-55Z-HH-M6C / ACIQ-12CD-2 / ACIQ-18CD / ACIQ-24CD is the perfect solution for year-round heating and cooling in up to 4 spaces.

       

      55,000 BTU ACIQ Extreme Multi-Zone Mini Split Heat Pump Condenser - R454B | 230V

      Overview

      ACIQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACIQ-55z-HH-M6C, you can have up to 6 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

      Quick Facts

      • 55,000 BTU, 22.2 SEER2 multi zone heat pump condenser
      • Designed to function with up to 6 attached air handlers
      • Efficient cooling from -22°F to 122°F outdoor temperatures
      • Efficient heating from -22°F to 75°F outdoor temperatures
      • Integrated Extreme Heat technology with base pan heater
      • Gold Fin full-protection coating on condenser coil
      • Quiet operation at even the highest workloads

      55,000 BTU, 22.2 SEER2

      The 55,000 BTU, ACIQ-55z-HH-M6C is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 22.2 SEER2, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

      Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACIQ condensers, a minimum of two air handlers is needed for the unit to function.

      Extreme Heat Base Pan Heater Technology

      1202791852265065

      Each ACiQ condenser has integrated Extreme Heat technology to maximize heat performance in extreme cold weather. Extended heat pump performance (HyperHeat) harnesses the power of inverter condenser with outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22°F. Plus, every Extreme Heat ACiQ condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation.

      Quality Construction

      aciq-quality-construction_2

      State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.

      Highest Efficiency

      compressor_1_2

      ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.

      Longer life, longer warranty

      aciq-longer-warranty_2

      Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. Register equipment at ACiQ.com to extend warranty protection to 7 years parts, 12 years compressor.

      Installation and Maintenance

      1202791852265067

      ACiQ multi zone condensers are pre-charged with R410-A refrigerant for 25' per air handler connection. In many cases, no additional refrigerant is needed. All units are run-tested at the factory for years of trouble-free performance. Troubleshooting is easy thanks to unit's self diagnosing control board with alerts that are sent to each connected air handler.

      Self Cleaning Condenser

      ACiQ condensers stay clean and efficient with self-cleaning technology built right in. At the end of each cycle, the fan reverses direction and blows air out the back of the unit — helping remove leaves, dirt, and debris before buildup can begin.

       

      12,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

      Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

      The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

      Installation Considerations

      Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

      Features

      • 12,000 btu of Heating or Cooling
      • Dry and Fan modes also available
      • Good for a smaller room in most climates
      • Wall mounted thermostat included

      Concealed Duct

      40mbq_1_4_1

      Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

      Quiet Comfort

      Concealed-duct_1

      Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

       

      18,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

      Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

      The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

      Installation Considerations

      Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

      Features

      • 18,000 btu of Heating or Cooling
      • Dry and Fan modes also available
      • Good for a medium room in most climates
      • Wall mounted thermostat included

      Concealed Duct

      40mbq_1_4_1

      Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

      Quiet Comfort

      Concealed-duct_1

      Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

       

      24,000 BTU ACIQ Platinum Single Zone Concealed Duct Mini Split Air Handler - R454B | 230V

      Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit. You run flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location. Depending on the capacity of the unit, up to 4 flex duct runs can be connected, perfect for a pair of small bedrooms or a master suite.

      The design is extremely simple return air is brought in at the rear of the unit and supply (cooled or heated) air is pushed out the front by an almost-silent squirrel cage fan. You attach a pre-made manifold takeoff or field-fabricate plenums using ductboard. Using readily available supplies, the customization possibilities are endless.

      Installation Considerations

      Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.

      Features

      • 24,000 btu of Heating or Cooling
      • Dry and Fan modes also available
      • Good for a medium room in most climates
      • Wall mounted thermostat included

      Concealed Duct

        40mbq_1_4_1

        Concealed Duct air handlers give you all the advantages of a multi zone mini split, without any visible air handlers on your walls or ceilings.  These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling or behind a soffit.  Air distribution is achieved by using flex ducting from the concealed duct air handler to ceiling or wall registers in your desired location.  Using readily available supplies such as ductboard, duct takeoffs and flex ducting, you can create a flexible, economical solution for a wide variety of applications.

        Quiet Comfort

        Concealed-duct_1

        Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.

        Condenser Specifications:

        SKU ACIQ-55Z-HH-M6C
        Refrigerant Charge     151.68 oz.
        Weight 276.680000
        AHRI Certificate Number 216032373
        Brand/Manufacturer ACiQ
        Replaces     ACIQ-55Z-HH-M5B
        Product Features Low Ambient Heating
        HSPF2 10.5
        Cooling BTU 51000
        Heating BTU 55000
        Maximum CFM 4503
        Decibel Level (dBA) 65
        Electric Heat Heat Pump
        Energy Star Yes
        Refrigerant R454B
        SEER2  22.2
        Compressor Type     Twin Rotary
        Liquid Line     1/4" (6)
        Suction Line     3/8" (4); 1/2" (2)
        Electrical     208/230V, 1 Phase, 60 Hz
        Phase Single Phase
        Max Breaker Size     40A
        Min. Breaker Size     39.5A
        Tonnage 4.5 Ton
        BTU/Tonnage     55,000 BTU/4.5 Ton
        Mini Split Type     Wall Mounted
        Zone Compatibility     Multi Zone
        Height 52.48"
        Width 37.48"
        Depth 16.34"
        Warranty 12 year compressor, 7 year parts with online registration
        Resources
        Safety Information PROPOSITION 65 WARNING

         

        12,000 BTU Air Handler Specifications:

        SKU ACIQ-12CD-HH-MC
        Weight  73.850000
        Manufacturer     ACiQ
        Cooling BTU 12,000 BTU
        Heating BTU 12,000 BTU
        Maximum CFM Up to 419.10 CFM
        Decibel Level (dBA) As low as 26.0 Decibels
        Electric Heat     Heat Pump
        Refrigerant R454B
        Liquid Line 1/4"
        Suction Line 3/8"
        Electrical 208/230V, 1 Phase, 60Hz
        Electric Phase Filter     Single Phase
        BTU/Tonnage 12,000 BTU/1 Ton
        Mini Split Type Concealed Duct
        Zone Compatibility Multi Zone, Single Zone
        Height     9.65"
        Width 27.56"
        Depth 29.53"
        Warranty 12 year compressor, 7 year parts with online registration
        Resources
        Safety Information PROPOSITION 65 WARNING

         

        18,000 BTU Air Handler Specifications:

        SKU ACIQ-18CD-HH-MC
        Weight  91.270000
        Manufacturer     ACiQ
        Cooling BTU 18,000 BTU
        Heating BTU 18,000 BTU
        Maximum CFM Up to 706.30 CFM
        Decibel Level (dBA) As low as 28.0 Decibels
        Electric Heat     Heat Pump
        Refrigerant R454B
        Liquid Line 1/4"
        Suction Line 1/2"
        Electrical 208/230V, 1 Phase, 60Hz
        Electric Phase Filter     Single Phase
        BTU/Tonnage 18,000 BTU/1.5 Ton
        Mini Split Type Concealed Duct
        Zone Compatibility Multi Zone, Single Zone
        Height     9.65"
        Width 39.37"
        Depth 29.53"
        Warranty 12 year compressor, 7 year parts with online registration
        Resources
        Safety Information PROPOSITION 65 WARNING

         

        24,000 BTU Air Handler Specifications:

        SKU ACIQ-24CD-HH-MC
        Weight  91.930000
        Manufacturer     ACiQ
        Cooling BTU 24,000 BTU
        Heating BTU 24,000 BTU
        Maximum CFM Up to 853.50 CFM
        Decibel Level (dBA) As Low as 29.50 Decibels
        Electric Heat     Heat Pump
        Refrigerant R454B
        Liquid Line 3/8"
        Suction Line 5/8"
        Electrical 208/230V, 1 Phase, 60Hz
        Electric Phase Filter     Single Phase
        BTU/Tonnage 24,000 BTU/2 Ton
        Mini Split Type Concealed Duct
        Zone Compatibility Multi Zone, Single Zone
        Height     9.65"
        Width 39.37"
        Depth 29.53"
        Warranty 12 year compressor, 7 year parts with online registration
        Resources
        Safety Information PROPOSITION 65 WARNING